Our Products

A high-build, 100% solids epoxy base coat engineered for maximum adhesion and chemical resistance. Used as the foundation layer in garage, commercial, and industrial floor systems. Bonds directly to properly prepared concrete and accepts decorative broadcast aggregates.

A fast-curing, UV-stable polyaspartic topcoat that provides superior abrasion resistance, scratch resistance, and long-term color retention. Applied over epoxy base coats or as a standalone system. Cures in hours rather than days, minimizing downtime.

A decorative epoxy system incorporating metallic pigments to create flowing, three-dimensional visual effects. Each installation is unique — no two floors look the same. Sealed with a polyaspartic topcoat for long-term durability and UV stability.

A full-broadcast vinyl flake system over a Resinwerks epoxy base, sealed with a polyaspartic topcoat. Provides excellent slip resistance, hides imperfections, and offers hundreds of color blend options. The most popular system for residential garages and commercial spaces.

Ameripolish 3DHS is a colloidal silica densifier that penetrates concrete and reacts with calcium hydroxide to form additional CSH (calcium silicate hydrate), dramatically increasing surface hardness and abrasion resistance. A cornerstone of the Ameripolish polishing system.

A fluoropolymer-based stain repellent that penetrates polished concrete to provide oil and water repellency without altering the appearance or sheen of the floor. Applied as the final step in the Ameripolish polishing system for long-lasting protection.

Translucent concrete dyes that penetrate the surface to add color while preserving the natural look of polished concrete. Available in solvent-based and water-based formulas with a wide palette of standard and custom colors. Applied between grinding passes for deep color integration.

Every ALX Pro installation begins with flashing all termination edges, drains, penetrations, and transitions before any field membrane is applied. Westcoat EC-12 elastomeric flashing compound is troweled into all inside corners, coves, and wall-to-deck transitions to create a fully monolithic waterproof detail. Drain collars are set in flashing compound and all penetrations are sealed before the field work begins. This step is the most critical — improper flashing is the leading cause of deck waterproofing failures in Colorado.

After flashing, 2.5 lb galvanized metal lath is mechanically fastened across the entire deck field. The lath serves as the structural reinforcement layer for the system — it locks the membrane to the substrate, distributes stress across the surface, and prevents the system from delaminating under Colorado freeze-thaw movement. Lath is lapped a minimum of 1" at all seams and turned up walls a minimum of 6". This step is what separates a professional ALX Pro installation from a paint-on coating — the lath-reinforced system can bridge cracks and accommodate substrate movement that would split an unreinforced membrane.

The Westcoat EC-11 elastomeric base coat is trowel-applied over the metal lath in two passes to fully embed the lath and create a seamless, monolithic waterproof membrane. The first pass forces the material into and through the lath openings; the second pass brings the surface to a uniform thickness of approximately 3/16". The cured membrane is 100% waterproof, elongates up to 300% before failure, and is rated for continuous ponding water. This is the primary waterproofing layer of the system — everything above it is finish; everything below it is structure.

Once the membrane has cured, a texture coat of Westcoat EC-48 acrylic finish is applied and silica sand is broadcast into the wet material to create a slip-resistant profile. Sand aggregate size is selected based on the application — finer aggregate for residential patios and balconies, coarser aggregate for pool decks and commercial walkways where maximum slip resistance is required. The texture coat also provides the mechanical bond surface for the final color topcoat. Slip resistance is tested and documented to meet ADA and local code requirements.

The final step is two coats of Westcoat EC-48 UV-stable acrylic finish in the client's chosen color. Westcoat's full color palette is available — from neutral concrete tones and warm sandstone shades to bold custom colors matched to architectural specifications. The finish coat seals the texture layer, provides the final waterproof cap, and delivers the long-term UV and weathering resistance the system is known for. At Colorado's elevation, UV degradation is significantly accelerated — the EC-48 formulation is specifically engineered for high-altitude sun exposure and resists chalking, fading, and surface erosion for 10–15 years under normal conditions.

A single-component, elastomeric waterproofing coating for above-grade concrete and masonry. Provides a seamless, flexible membrane that bridges cracks up to 1/16" and resists hydrostatic pressure. The go-to system for retaining walls, foundations, and CMU block structures.

A single-component, moisture-curing polyurethane sealant for sealing control joints, expansion joints, and cracks in concrete and masonry. Remains permanently flexible, bonds to most construction substrates, and resists weathering, UV, and movement.

A cementitious, crystalline waterproofing treatment that penetrates concrete and forms insoluble crystals within the capillary structure. Provides permanent, self-sealing waterproofing that becomes an integral part of the concrete matrix — ideal for below-grade applications.